How to Pair MPOW Headphones(Comprehensive Guide)

MPOW Headphones

Since you purchased MPOW headphones, I am assuming you are looking for information on how to pair MPOW headphones with an iPhone, an Android device, a Windows computer, or a Mac. These instructions should work for the Mpow Flame, Mpow D7, Mpow H5, Mpow 059, Mpow R3, and Mpow Bass, as well as the majority of other models that aren’t listed. So let’s get started.

How to Pair MPOW Headphones

Put your MPOW headphones in Bluetooth pairing mode before attempting to pair them with anything else. Here’s how to do it:

  • If this is the first time you’re using this pair of MPOW headphones, turn them on by pressing the power button, and you’ll automatically hear the “pairing” prompt.
  • If you’ve already paired your headphones before, press the power button for three to seven seconds, and you’ll hear the “pairing” prompt again.
  • Opening the case for the MPOW true wireless earbuds will immediately start the pairing process. Press and hold the multifunction button on each earbud for about two seconds to turn them on if they aren’t in the case. Once pairing mode has been activated, double-tap the multifunction button on the right earbud.

How to Pair MPOW Headphones to iPhone

Follow the steps :

  • The voice prompt will be audible and the Red & Blue indicator lights will flash alternately and quickly after pairing is complete, so press and hold the Bluetooth button for 5–6 seconds.
  • Now turn Bluetooth on in your iPhone.
  • Search the MPOW.
  • To connect the headphones to your device, click MOW.

Here is the video to show you how to connect MPOW M30 TWS with iPhone.

Pairing MPOW Headphones to Android Smartphones

You have to follow these steps :

  • When pairing is complete, the voice prompt will be audible and the Red & Blue lights will alternately flash for 5–6 seconds after you have long pressed the Bluetooth button.
  • On your Android smartphone, enable Bluetooth.
  • The MPOW Headphone Bluetooth visibility is visible.
  • Simply tap your Android phone’s screen to connect your headphones.

Here is the video to show you how to pair Mpow Flame bluetooth to Samsung Galaxy Android.

Pair Your MPOW Headphones with Windows

There are a few simple steps that you have to follow –

  • First, you must activate your Bluetooth and place your headphones in pair mode.
  • Go to settings to enable Bluetooth on your Windows computer or laptop.

Pair Your MPOW Headphones with Windows

  • Turn on Bluetooth by clicking Devices.
  • If MPOW headphones are pairing first with this device then you have to click on “Add Bluetooth or Other devices

How to Pair MPOW Headphones to Windows Laptop PC

  • Click on “Bluetooth”
  • Now you will “MPOW Headphones” in Add a device.
  • You only need to tap on your Windows computer to connect your headphones.

Here is the video to show you how to pair Mpow Flame BlueTooth to Windows 10 Laptop.

Pair MPOW Headphones with Mac?

There are some simple steps that you have to follow –

  • Simply press and hold the MPOW button for 5–6 seconds while holding the button down to activate Bluetooth on the MPOW headphones and pair mode.
  • Go to the settings section on your Mac computer now.
  • Toggle on Bluetooth by finding the option.
  • The Bluetooth visibility of MPOW headphones.
  • To pair, merely click on that.

Troubleshooting Your Bluetooth Connection

Try clearing your currently paired devices and re-pairing your headphones or speaker if you have tried the above steps and your device is still not pairing. You can do this by either holding down the MFB and Volume + buttons for four seconds (which one works depending on the model) while the device is charging or by long pressing the MFB button until the blue light flashes three times.

FAQs

Charging the Headset

Before using the headset for the first time, it must be fully charged (for more than 6 hours).

  1. Connect the USB charging cable to the headphone’s USB charging port.
  2. When charging, the indicator light turns red.
  3. It takes about two hours to fully charge.
  4. When charging is finished, the red indicator light turns blue and disappears.

Low-Voltage alert

  • When the indicator turns into a red and alert tone “battery low” sounds indicate that the battery has run out, and needs to charge as soon as possible.

Power On/off the Headset

  • Power on: Press the “MPOW” button for about 3 seconds until the blue indicator flash. You will also hear the indication voice “Power On”.
  • Power off: Press the “MPOW” button for about 3 seconds until the red indicator light flash and then goes off. You will also hear the indication voice “Power Off”.

How Do I Reset My MPOW Bluetooth Headset?

How to reset your MPOW Bluetooth headset is provided below.

  • When finished, switch off your MPOW headphones and place them in the charging box.
  • Holding down the power button, press it.
  • When the red and white lights begin to alternately blink, pay attention.
  • Go to your device’s Bluetooth settings to fix it.
  • Watch for the Bluetooth blue light to start flashing

Final Words

Now you should already know how to pair MPOW headphones with an iPhone, an Android device, a Windows computer, or a Mac. Check the following article if you want to know more about Bluetooth headphones.

How to Connect Bluetooth Headphones to Chromebook (Step by Step) – 1st Audio and Video
Can I Use Bluetooth Headphones on an Airplane – Rules To Know – 1st Audio and Video
How to Connect Bluetooth Headphones to Oculus Quest 2(Video) – 1st Audio and Video
Why Do My Bluetooth Headphones Keep Cutting Out? – 1st Audio and Video

How To Connect JBL Headphones With Different Devices – 1st Audio and Video

Leave a Reply

Your email address will not be published.